Panasonic SV-AV10A Operating Instructions Manual

Also see for D-snap SV-AV100: Operating instructions Operating instructions

Contents

UPSpotlight Mode≥With this Mode, recorded images may turnout to be extremely dark.≥If the recording subject is extremely bright,its recorded image may turn out to bewashed out.Surf & Snow Mode≥If the recording subject is extremely bright,its recorded image may turn out to bewashed out.ª Deleting Scenes (Delete) (l 40)≥Erased files cannot be restored.≥A locked file cannot be erased. Releasethe lock to erase them.≥No files can be erased if the write protectswitch on the SD Memory Card is set to[LOCK].≥If a file is erased on the SD Video Camera,the DPOF information set by anothercamera may also be erased.≥A still picture file (other than JPEG) thatcannot be played back on the SD VideoCamera may be erased.≥Erasing many files may take a little time.Wait until the Card Access Lamp goes out.≥Do not turn the power off or remove theMemory Card while a file is being deleted.Otherwise, the Memory Card may bedamaged.ª Locking Scenes (File Lock) (l 41)≥Even if files are locked, the files will bedeleted when the Memory Card isformatted.≥The File Protection carried out by this SDVideo Camera is only effective for this SDVideo Camera.≥The SD Memory Card has a writeprotection switch on it. If the switch ismoved to the [LOCK] side, you cannotwrite to or format the Memory Card. If it ismoved back, you can.≥Locking/Unlocking many files may take alittle time. Wait until the Card AccessLamp goes out.ª Designating Scenes to be Printed(DPOF) (l 42)≥DPOF is the abbreviation of Digital PrintOrder Format. DPOF is used to selectimages you want to print. DPOF can onlybe used with products that support thisfeature.≥The number of prints can be set from 0 to99.≥This SD Video Camera may not recognizethe DPOF set by another type of device.≥DPOF-setting many files may take a littletime. Wait until the Card Access Lampgoes out.ª Formatting the Memory Card(Format Card) (l 51)≥Normally, it is not necessary to format theMemory Card.≥If the Memory Card performance becomesunstable (recording or playback fails, etc.),try to format it.≥If a message to prompt you to check theMemory Card comes up, it will benecessary to format it in order to use it onthe SD Video Camera.≥By formatting, all data stored in theMemory Card (e.g., MPEG2 motionimages, MPEG4 motion images, stillpictures) are erased.≥Format the Memory Card on the SD VideoCamera. A Memory Card formatted on amachine other than the SD Video Cameramay not be used. A Memory Cardformatted on the SD Video Camera maynot be used on other machines. Format aMemory Card on the machine on which itis used.≥Do not use the personal computer(Explorer) to format it. Otherwise, it maynot be recognized by the SD VideoCamera.≥If the write protection switch of the SDMemory Card is set to [LOCK], datacannot be erased.≥When the Memory Card is formatted, thefiles will be deleted, even if files arelocked.