2. Setting Up Your PhoneICX-35-750 ICX (International), issued March 1999 235. Press the HOLD key.6. Repeat steps 2-5 to program additional keys.7. Replace the handset or press the ON/OFF key.1. Pick up the handset or press the ON/OFF key.2. Press the PROG key.3. Press the desired FF key.4. Press the HOLD key.5. Replace the handset or press the ON/OFF key.Note: This task requires a display phone.1. Pick up the handset or press the ON/OFF key.2. Press the CONF key.3. Press the FF key. The assigned function appears on the display.4. Replace the handset or press the ON/OFF key.SETTING UP ONE-TOUCH KEYSYou can set up one-touch keys on a non-display or small-display phone to storephone numbers, speed dial numbers, or feature access codes.1. Pickup the handset or press the ON/OFF key.2. Press the PROG key.3. Press the one-touch key to be programmed.**If you assign an extension number to an FF key, the FF key will light red when the exten-sion is busy. It will light green when Do-Not-Disturb (DND) or Call Forwarding is set. Inaddition, you can pick up a call that is ringing or on hold at the extension by simply pressingthe FF key when it is flashing.If . . . Then . . .To clear an FF key’s programmingTo check the FF key’s setupTo program a one-touch key for an outside phone number