Panasonic Section750 User Manual

Contents

2. Setting Up Your PhoneICX-35-750 ICX (International), issued March 1999 29Notes:• Before linking multiple SSD numbers to a PSD bin, the SSD bins mustalready have been programmed with the appropriate speed dial information.(This requires system programming.)• If numbers do not appear on the display (00-79 or 000-799) when you useSSD codes, your extension is not programmed to display that data.1. Pick up the handset or press the ON/OFF key.2. Either:• Press the PROG key and then press the MEMORY key.OR• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).3. Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.4. Press the MEMORY key.5. Enter the SSD bin number that contains the first part of the number to be dialled.(If a pause is required, press the REDIAL key.)6. Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to belinked.7. Press the HOLD key when you are finished.8. Replace the handset or press the ON/OFF key.1. If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia],or 81-84) to access an outside line. (Normally the trunk is selected by the speeddial numbers.)2. Press the PSD key.Assigning and Deleting Names for PSD NumbersAfter assigning a PSD number to a one-touch or soft key, you can assign a name tothe key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD namewhen you are in the PSD Directory mode.To link speed dial numbers to a PSD binTo use a PSD key that links multiple speed dial numbers