39• Don’t press any buttons on the remotewhile the show is being saved tovideotape or the on-screen displayswill be recorded.• Press the RECORD button on yourVCR before the countdown reaches 1if you want to record the informationabout the show. This will show youwhat the program is about when youwatch the videotape later.• Some VCRs take longer than othersto begin recording. You may want toexperiment to see when to beginrecording on your VCR.1 Insert a rewound videotape and turn on your VCR.4 Press / to select “Save to VCR,” then pressSELECT.Saving Shows to VideotapeFor long-term archiving, or if you want to save a show permanently, you cansave shows recorded by the Hard Disk Recorder to videotape. This way, youreserve more space for the Hard Disk Recorder to record other shows. TheHard Disk Recorder is not intended to be used as a long-term storage device.Before you begin...Make sure your VCR is properly connected to the Hard DiskRecorder. This is done by connecting cables from the OUTPUT jackson the Hard Disk Recorder to the INPUT jacks on your VCR. Thecables you use for this connection depend on the types ofinput jackson your VCR. See page 14 and 15 for more on connecting a VCR tothe Hard Disk Recorder.3 Press / to select the show you want to save,then press SELECT.• The popup menu displays.5 Press SELECT with“Continue” highlightedto start the on-screencountdown.6 Press the Recordbutton on your VCRbefore the on-screencountdown reaches 1.To delete the show once it’s done recording tovideotape,a. Press REPLAY GUIDE to display the Replay Guide.b.Press / / / to selectthe show that was recordedto a videotape, then pressSELECT.c. Press / to select “Delete,”then press SELECT.d.Press / to select“Yes,” then press SELECT.• The show is permanentlyremoved from the Replay Guide,freeing up more recording space.SELECTREPLAYGUIDE/ / /buttons343452 Press REPLAY GUIDE to display the Replay Guide.• You can also select “Replay Guide” from the Main Menu.NOTES