Preparation:≥ Connect the Sirius receiver (CR-SRT100, op-tion).≥ Set the Sirius setting to SET ON.≥ Sirius satellite radio is available on a chargeablebasis.≥ The CA-CD55, available separately as an option-al accessory, is required to connect the CDchanger and the Sirius receiver for your listen-ing enjoyment at the same time.Note:≥ The receivable area of Sirius broadcasting is lim-ited.≥ Refer to the operating instructions for Sirius re-ceiver for details.≥ If the Sirius receiver and CD changer have beenconnected, operation will not be switched to theCD changer mode using [BAND]. Instead, press[SOURCE] to switch to this mode.ENGLISH29ENGLISH18Sirius ControlSirius control mode displayLights when Sirius setting isSET ON.Sirius Mode(When a Sirius receiver is connected andSirius setting is SET ON.)Press [SOURCE] to change to the Siriusmode.1BandPress [BAND].2Channel Selection[$]: Up[%]: DownPress and hold [%] or [$] for more than0.5 seconds to change channels rapidly.3Band Channel numberExample: channel number 101 Press .2 Press [1] [0].3 Press [BAND].[ ]#Note:≥ Press [DISP] (display) to return to the regularmode.Press ["] or [#].The first channel in a selected category is received.The category name is displayed after the channelnumber.Note:≥ When the category is changed, ON will be set au-tomatically for the category priority setting.(page 10)Up to 6 stations each can be saved in the SR1, SR2and SR3 preset station memories.1 Select a band and channel. (previous page)2 Press and hold [1] to [6] for more than 2 sec-onds to memorize.Preset numberNote:≥ Existing saved stations are overwritten with newstations after this procedure above.1 Select a band. (previous page)2 Press [1] to [6].Caution:≥ To ensure safety, never attempt to preset stations while you are driving.≥ Do not watch the scroll display while driving a car.Press [DISP] (display).Channel number (default)Channel name*Artist name (scroll)*Song title (scroll)Clock displayManual Preset MemoryPreset Station CallingDirect Channel SelectionCategory Selection Display Change[DISP] (display)["] [#] (category)Preset number[SOURCE][BAND](set)[0] to [9](channel number)[1] to [6](preset station)[DISP] (display)64975Car AudioSOURCEMUTEPOWERRANDVOL31 2DISPBANDREP6 5SETSEL#SCANMENUNUMBER80[%] [$](channel)["] [#](category)[ ] (number)#Channel numberCategory nameNote:Displays when there is no text.*Press and hold [DISP] (display) for more than2 seconds to have an another circle scroll while atext is displayed.What is displayed here changes in linewith the reception sensitivity.