ENGLISH613Electrical ConnectionsENGLISH512TroubleshootingDisplay Cause/StepNote:≥ For details, refer to the operating instructions for the Sirius receiver used.Your location is out of receivable areas (e.g. in a tunnel), or the unit isdecoding a selected broadcast. The display appears also while the con-nections are being checked after the power has been turned on.➡Wait until getting out of the unreceivable area or completing thedecoding.User’s registration has not been carried out.➡Complete user’s registration.A channel that is not included in the agreement was selected.➡Select a channel that is included in the agreement. Refer to the op-erating instructions for Sirius receiver with regard to the agreement.The ID could not be acquired.➡Contact your nearest Panasonic Servicenter for service.The selected channel is invalid.➡Select a channel which can be received instead.≥ When the Sirius receiver fails to operate for some reason.≥ When ON serves as the Sirius setting and the Sirius receiver has notbeen connected.➡Check the Sirius receiver’s connections.(Call 888-539-SIRIUS tosubscribe.)Troubleshooting Tips❐ Sirius ControlExample combination≥ Sirius receiver (CR-SRT100, option)≥ CD changer (CX-DP88U, option)≥ Dual changer control unit(CA-CD55, option)Note:≥ For wiring, carefully read the operating in-structions for the devices connected.CD changer(CX-DP88U, option)DIN extension cord(supplied with CA-CD55)CD changer input cordL (white)R (red)Ground leadDual changer control unit(CA-CD55, option)RCA Cord(supplied with CA-CD55)Power connectorDIN cordDual changeroutput cord(Brown/white stripe)Dual CD changer control leadChanger 1connectingcordChanger 2connectingcordR (red)L (white)RCA cordCD.C-INTWIN CD. C-CONTFuse (3 A)Battery lead6Sirius receiver(CR-SRT100, option)RCA Cord(option)DIN cordExtension cord(supplied with CR-SRT100)CQ-DF903UCQ-DFX983UExtension cord(supplied with CX-DP88U)