1.3 Accessories9 Installation Guide (this document) 1 (*) CD-ROM (PDF version of Operating Instructions) 1 Rubber foot 4 Mounting bracket (for 19-inch rack) 2 Connecting bracket 2 Screw (for 19 inch rack) 4 Screw (for fixing the main unit and the 19 inch rack mount bracket) 8 Screw (for Connecting bracket) 8 Power cord 1* Just the PN28058-TH has 1 Installation Guide in Thai (a total of 2 guides).[Optional accessories] PN54021K-XX 1000BASE-SX SFP Module PN54023K-XX 1000BASE-LX SFP ModuleThe XXs are identical to the intended nation of delivery codes.Please be sure to confirm the content.Please contact our distributor if any of the contents are insufficient.1.4 Basic operationThis Product does not have a power ON/OFF switch. Connect the supplied powercord to this Switching Hub and connect the other end into an electric outlet.This Switching Hub operates at AC 100 - 240 V (50/60 Hz).When power is supplied, all the LEDs are turned ON.Then, POWER LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode)lights in orange, and self-diagnosis of hardware is executed.On completion of self-diagnosis, POWER LED (Power), STATUS/ECO LED(Status/ECO mode) and TEMP LED (Temperature sensor) light in green, and theSwitching Hub starts operation as a Switching Hub.As this Switching Hub succeeds in communicating with a terminal connected to eachport, LED of the port lights up.When the terminal is not operating normally, for example when power is notsupplied to the terminal, LED is not lighted.QuantityFor configuration and management method, please see the PDF versionOperating Instructions in CD-ROM.[Power Cord]The following power cords are supplied as per the intended nation of delivery.LocaleThailand 250 VAC 6 A TIS166-2549-Indonesia 250 VAC 10 A250 VAC 10 A250 VAC 5 ACEE7/7BS1363BS1363-13 A5 AMalaysiaSingaporeProduct NumberPN28058-THPN28058-IDPN28058-MYPN28058-SGPower Cord Rating FUSE Rated Current Plug Type