Panasonic TC-P58V10 Operating Instructions Manual

Also see for TC-P58V10: Operating instructions Manual de instrucciones

Panasonic TC-P58V10 Operating Instructions Manual Manual pdf 26 page image

50 51AdvancedEditing and Setting ChannelsEditing and Setting ChannelsThe current channel settings can be changed according to your needs and receptionconditions.■ Press to exit froma menu screenDisplay menuSelect “Setup”MenuPictureAudioTimerLockVIERA LinkSD cardClosed captionSetupnextselectSelect “ANT/Cable setup”Setup 1/2ClockANT/Cable setupConnected devicesAnti image retentionReset to defaultsLanguageAllChannel surf mode nextselectSelect the functionCableANT/Cable setupANT inAuto programManual programSignal meternextselectSet■To reset the settings of setup menuSelect “Reset to defaults” in Setup menu ( ) and press OKInput your 4-digit password with number buttonsSelect “YES” on the confirmation screen and press O KAutoprogramSetautomaticallyAutomatically searches and adds available channels to the memory.Select “ANT in”Select Cable or AntennaOr select “Not used” (p. 16).Select “Auto program”CableANT/Cable setupANT inAuto programManual programSignal meternextselectSelect a scanning mode (p. 17)Auto programAll channelsAnalog onlyDigital onlyokselectSettings are made automaticallyAfter the scanning is completed, select “Apply”.(see below ).All previously saved channels are erased.ManualprogramSetmanuallyUse this procedure when changing the channel setup orchanging the channel display.Also, use this to add or skip channels from the channellist manually.You can select a channel tuning mode (Digital only/Analog only) in “Channel surf mode” (p. 36)EditCaption---80-101ChangeOKRETURNDeleteABC → abcG YEdit CH captionCaptionChannelselectchangeset/nextorCaptionSelect the station identifier (maximum 7 characters available)FavoriteSet favorite 1/326-112selectnextSet favorite Select the numberAddPress OK to select “Yes (add)” or “No (skip)”Move cursor to channel numberManual programEdit CancelApplyCaption Favorite Add2 ...... Yes3 ...... YesChannelselectPress OK to tuneto the channel.Select “Apply”programCancelApplyCaption Favorite Add...... Yeselselect “Apply”okSelect “Edit”Manual programEdit CancelApplyCaption Favorite Add2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesChannelselectnextSelect the item to be editedR G B YSelectRETURNOKManual programEdit CancelApplyCaption Favorite Add2 ...... Yes3 ...... Yes4 ...... Yes5 ...... Yes6 ...... Yes7 ...... Yes8 ...... Yes9 ...... YesChannelPrev.page Next pageCaptionFavoriteAddProceed tonext pageGo back to previous pageselect the itemto edit (Caption/Favorite/Add)next• Caption:Changes the station identifier• Favorite:Registers channel to FavoriteList• Add:Adds or skips channelsTo cancel the EditManual programEdit CancelApplyCaption Favorite Add2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesChannel selectnextChanges will be lost. Continue?Yes No ok(returns to “ANT/Cable setup”)select “Yes”SignalmeterChecksignalstrengthCheck the signal strength if an interference is found or freezing occurs on a digital image.1-1Signal meterChannelTune manuallySignal strengthCurrent 30%Peak level 45% Signal intensitychangechannelokorIf the signal is weak, check the antenna.If no problem is found, consult your local dealer.NoteNot available if “Cable” is selected in “ANT in”(see above).Available only for digital antenna channels.If “Lock” (p. 48) is activated and “ANT/Cable setup” is selected, “Enter password.” will be displayed.