12.2. Contents of Option MenuThis chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful forspecial function required customers. This should be set at the installation stage. The end user could not set or change thembecauseof hidden On screen menu.Option menus default setting ContentsOff-timer function Enable Off-timer operation Enable/Disable.On Screen display On Enable/Disable to display input mode indication after power on and no signalindication.Initial INPUT Off Sets the initial input mode when the power is turned on . Allow input modeselection while power is on.Initial VOL. level Off Sets the initial volume level when the power is turned on. Allow Volumecontrol while power is on.Maximum VOL. Level Off Sets the maximum volume to desired level. Volume cannot exceed this level.INPUT lock Off Fixes the input mode to AV, Component/RGB or PC. Can not change inputmode by input selection button.Studio W/B Off Bottom operation buttons invalidation.Off: Invalid buttons are null and void.MENU & ENTER: Invalid buttons are only MENU Screen ON/OFF button,Enter/Aspect button.On:Invalid buttons are all buttons.Button lock Off Set warm mode color temperature to 3,200 Kelvin.Remote control User Level Off Remote key invalidation.Off : Valid key are all keys of remote.User1 : Valid key are only Stand-by (ON/OFF), Input, Status, Surround,Sound mute On/Off, and volume adjustment.User2:Valid key is only Stand-by (ON/OFF).User3 : All keys are invalid.ID Select 0 Set ID number from 0 to 100 for Remote ID and Serial ID.Remote ID Off Remote ID function On/Off.(While the Remote ID is on, standard remote function can not control theunit.)Serial ID Off Serial ID function On/OffSlot power Off Sets the slot power mode when the power is turned on.Off: The power isn´t supplied to Optional Terminal Board.Auto: The power is supplied to Optional terminal Board when the power isturnedon. But the power isn´t supplied to the Board at the Stand-by condition.On: The power is supplied to Optional Terminal Board when the power isturned on and stand-by condition.Note :In the case the set can´t be operated, how to set button lock, Remocon User Level and Remote ID off and be able to operatethe set.1. Press down volume Down button at the bottm of the set, at the same time pressing the R button on the remote control formore than 5 seconds.36TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS