Panasonic TH-37PWD7B Operating Instructions Manual

16.......(Japanese).......(Chinese)ItalianoFrançaisDeutschEnglish(UK)EspañolENGLISH(US)R - STANDBYG POWER ONINPUT MENU ENTER+- VOLMENU ENTERINPUT +- VOLSURROUNDVOLN RPICTURE SOUND SET UPINPUTMULTIPIP SWAP SELECT MOVEZOOMINPUTINPUTSURROUNDVOLNPICTURE SOUNDRMULTIPIP SWAP SELECT MOVESET UPZOOM1/2SignalPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component / RGB-in selectRGBInput labelPower saveSetupPC ININPUT1 INPUT2 INPUT3SET UPPC ININPUT1 INPUT2Selecting the On-Screen Menu LanguagePress to display the Setup menu.Press to select your preferred language.Selectable languagesPress to select the OSD Language.Notes:• Selecting is also possible by pressing the INPUT button on the unit.• Input terminal will not be selected if the terminal board is not installed into the SLOT.• Select to match the signals from the source connected to the component/RGB inputterminals. (see page 32)• In 2 screen display, the same input mode cannot be selected for the main pictureand sub picture.Initial selectionsSelecting the input signalSelect the input signals to be connected by installing the optional Terminal Boards.Press to select the input signal to be played back from theequipment which has been connected to the PlasmaDisplay.Input signals will change as follows:• TH-37PWD7B• TH-42PWD7B, TH-42PHD7B, TH-50PHD7B