Panasonic TH-42LF6W Operating Instructions Manual

Also see for TH-42LF60W: Operating instructions Operating instructions Service manual

Contents

30Picture AdjustmentsItem Effect Adjustments Notes:+ You can change the level of eachfunction (Backlight, Contrast,Brightness, Colour, Tint, Sharpness)for each Picture Mode.+ The setting details for Normal,Dynamic and Cinema respectivelyare memorized separately for eachinput terminal.+ The “Tint” setting can be adjusted forNTSC signal only during Video inputsignal.+ “Backlight” can be adjusted when“ECO Mode” is set to “Custom” and“Power save” to “Off”. (see page37)Backlight Darker Brighter Adjusts luminance of the back light.Contrast Less More Adjusts the proper picture contrast.Brightness Darker BrighterAdjusts for easier viewing of darkpictures such as night scenes and blackhair.Colour Less More Adjusts colour saturation.Tint Reddish Greenish ` > x KSharpness Less More Adjusts picture sharpness.Advanced settingsItem Effect DetailsInput level Less More ` > & Z KGamma Down Up S CURVE 2.0 2.2 2.6AGC Off On Increases the brightness of dark signal automatically.W/B High R Less More Adjusts the white balance for light red areas.W/B High G Less More Adjusts the white balance for light green areas.W/B High B Less More Adjusts the white balance for light blue areas.W/B Low R Less More Adjusts the white balance for dark red areas.W/B Low G Less More Adjusts the white balance for dark green areas.W/B Low B Less More Adjusts the white balance for dark blue areas.Notes:+ Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.+ The adjustment values are memorized separately for each input terminal.+ The adjustment range values should be used as an adjustment reference.Helpful Hint: ( / Normalise Normalisation)On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any timeor the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.