Panasonic TH-42LF6W Operating Instructions Manual

Also see for TH-42LF60W: Operating instructions Operating instructions Service manual

Contents

52Item AdjustmentsClock DisplayOff: Not display the clock.On: Display the clock.The clock is displayed at the lower left of the screen when button is pressed.10:00Note: When “PRESENT TIME Setup” is not set, the clock is not displayed evenif “Clock Display” is “On” (see page 32)Power On Message(No activity poweroff)Whether to show/hide No activity power off Precautions at the time of power ON is set.On: The warning precautions are shown at the time of power ON.Off: The warning precautions are not shown at the time of power ON.Note:This setting is enabled only if “No activity power off” is “Enable” (see page 36).Function button assign 1Function button assign 2Set the functions that operates when is pressed. Signal: The “Signal” menu is displayed. Screensaver: The “Screensaver” menu is displayed. ECO menu: The “ECO Mode settings” menu is displayed. Set up TIMER: The “Set up TIMER” menu is displayed. @J@:= =@$$& K> =|\]]: & the YFB100 side is displayed.Note:Factory settings are as follows.["\ FUNCTION2 button: SignalUse the FUNCTION button Z K% $ *3D Y/C FilterColour systemSignalOnAutoCinema reality Off[ AV ]Noise reduction Off{ [" > KNormalisationWhen both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “RemoteID” adjustments, set all the values “Off” so that all the buttons are enabled again.Press the - / button on main unit together with button on the remote control and hold for more than 5 seconds.The “Shipping” menu is displayed and the lock is released when it disappears.Input SearchWhen a signal is not detected, another input with a signal is automatically selected.Input SearchPrimary InputOffSecondary InputInput SearchPress ACTION ( ) buttonOptions 1/3On screen displayInput SearchOnInitial input Off1 select2 adjustInput SearchOff: When there is no signal, the input is not switched automatically.All Inputs: Searches all inputs and switches to an input with a signal.Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.Options Adjustments