53Searching...“Searching...” is displayed during the input search.< @ @ Set the input to search when “Priority” is selected.(NONE) VIDEO Component/RGB PC DVI @J@:= =@$ HDMI1 HDMI2Note:+ This menu is available only when “Input lock” is “Off”. (see page 51)RS-232C/LAN Information TimingSet up the informing manner for no signal or temperature rising.While RS232C controls: Warning or error message sent on the display atuomatically.While LAN controls: Acquire the warning or error message from the display.RS-232C/LAN Information TimingNo Signal Warning TimingNo Signal WarningNo Signal ErrorTemperature WarningNo Signal Error TimingTemperature Warning ValueTemperature Warning Release Value5minOnOnOn10min55°C52°CPress ACTION ( ) buttonOptions 2/3Initial Power ModeOff-timer functionID selectSerial IDRemote IDStudio W/BLAN Control ProtocolRS-232C/LAN Information TimingNormalEnable0OffOffProtocol 1Serial Daisy Chain ---Off1 select2 adjust No Signal WarningIf set to “On”, the display sends out the no signal warning. No Signal Warning TimingSet up the detecting time for no signal warning. No Signal ErrorIf set to “On”, the display sends out the no signal error. No Signal Error TimingSet up the detecting time for no signal HUURU.Note:The “No Signal Error Timing” cannot be set shorter than “No Signal Warning Timing”. Temperature WarningIf set to “On”, the display sends out the warning temperature. Temperature Warning ValueSet up the detecting temperature for temperature warning. Temperature Warning Release ValueSet up the temperature to release the temperature warning.Options Adjustments