17Tuning menu – Programme editNote:When a programme position is locked, Direct Channel Accessusing the C and numeric buttons on the remote control is notavailable.Copying programme information to a recording deviceLocking a programme channelRenaming a programme channelOKOKBlueChanging the sound system for a channelOKNote:This is not available when you choose Q-Link Off in Setup menu.Move to the Name column.Choose the new character. The box at the bottom of the screen showsthe character currently selected.Move to the next character position.Continue until renaming is done.Press the OK button to store the new name.You may wish to lock a programme channel to prevent access to it.Move to the Lock column.Choose between Lock On or Lock Off.Press the OK button to store the new setting.You can copy programme information to a compatible recording deviceconnected to AV2 / AV3. See page 28 for connection information.Press the Blue button.Programme data will now be sent to the recording device(s). Thismight take a few seconds, depending on the number of stations stored.If the message “Feature not available” appears on the screen, thetelevision is unable to send the programme information to the recordingdevice(s). See the device’s instruction book for further information.You can change the sound system used for a programme channel.Move to the Sys column.Choose the required sound system:SC1 : PAL B, G, H / SECAM B, GSC2 : PAL ISC3 : PAL D, K / SECAM D, KF : SECAM L / L’Press the OK button to store the new setting.DOWNLOAD IN PROGRESSPLEASE WAITProgramme : 63Remote control unavailableProgramme editProg.ABCDEFGHIJKLMNOPQRSTUVWXYZ+- . 0123456789Chan. Name Lock Sys1 :2 :3 :4 :5 :CH44CH51CH41CH47CH37OffOffOffOffOffSC1SC1SC1SC1SC1XYZFTP123456Programme editProg. Chan. Name Lock Sys1 :2 :3 :4 :5 :CH44CH51CH41CH47CH37ABCXYZFTP123456OffOffOffOffOffSC1SC1SC1SC1SC1Programme editProg. Chan. Name Lock Sys1 :2 :3 :4 :5 :CH44CH51CH41CH47CH37ABCXYZFTP123456OffOffOffOffOffSC1SC1SC1SC1SC1