Panasonic TH-42PA50E Operating Instructions Manual

Also see for TH-37PA40E: Operating instructions

19Tuning menu – Manual tuningPress the MENU button.Move to choose Setup menu.Access Setup menu.Move to choose Tuning menu.Access Tuning menu.Move to choose Manual tuning.Access Manual tuning.Select the programme position to be tuned.Press repeatedly until required station is found.When the desired station is found, press the OK button to store.The programme position will flash.Press the EXIT button at any time to go back to watching TV.It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:Press the F button until Tuning mode is reached.Press the –/ or +/ button to access Tuning mode.Press the TV/AV button to move between Changeprogramme, Search and Change TV system.Press the –/ or +/ button to change programme positionor start search.When the desired station is found, press the STR buttonto store.The programme position will flash.Repeat above procedure to tune additional programmepositions.Press the F button at any time to go back to watching TV.Note:If your VCR is connected to this TV by an RF cable only, choose programme position “0” to tune to the VCRsignals.Manual tuning (via front panel)It is possible to retune individual programme positions:TVN1 2 34 5 67 8 90OKCManual tuning02 78:01 41CH121ExitSearch down/upReturnDirect entryStoreC 0 9SC1CH121Manual tuning02 78:01 41- , + : SearchTV / AV : Move cursorSTR : To storeF : To exitSTR F - / + / TV / AVMENUEXITOK