ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeScrolling bar onlyOff6:1512:30HighOffOffPRESENT TIME 99:99ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeScrolling bar onlyOff6:1512:30HighOffOffPRESENT TIME 99:9929Screensaver (For preventing image retention)These functions prevent the occurrence of an “image retention” on the display when turned ON.Wobbling: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention ofsharper contour of image.On1: Shifts the image every 30 seconds.On2: Shifts the image at a dot level pitch depending on screen-detection.Peak limit: Suppresses image contrast (peak brightness).Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 47)Press to select “Wobbling” or “Peak limit”.Press to select “On1”, “On2” or “Off” (Wobbling).“On” or “Off” (Peak limit).Reduces screen image retentionSide Panel AdjustmentDo not display a picture in 4:3 mode for an extended period,as this can cause an image retention to remain on the sidepanels either side of the display field.To reduce the risk of such an image retention, illuminate theside panels.side panel4:3Screen DisplayimageretentionPicture out Picture Picture and PictureNon picture areaThis function may be applicable to the non-picture area.1 Press to select Side panel.Press to select Off, Low, Mid, High.Press to exit from Screensaver.2Notes:• To reduce the occurrence of image retention, set the Side panel to High.• The side panels may flash (alternate black / white) depending on the picture being shown on the screen. UsingCinema mode will reduce such flashing.Off Mid HighLowDownloaded From TV-Manual.com Manuals