Panasonic TH-42PF11RK Operating Instructions Manual

Contents

OptionsWeekly Command Timer1/3Initial INPUTOnscreen display OnOffOffOff00Maximum VOL levelInitial VOL levelOffINPUT lockOffButton lockOffRemocon User levelOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain2/33/3OptionsOffOffOffClock DisplayRotateOffAll AspectSlot1Serial Slot SelectSlot powerOffPower On Screen Delay42Options Adjustments1235Press to display the Setup menu.46Item AdjustmentsWeekly Command Timer Sets Weekly Command Timer. (see page 45)Onscreen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial INPUTOff PC INPUT1 INPUT2 INPUT3Adjusts the input signal when the unit is turned on.Notes:• Only the adjusted signal is displayed. (see page 14)• Signal can be displayed when the Terminal board is installed.• This menu is available only when “INPUT lock” is “Off”.• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.(Ex. INPUT1A, INPUT1B)Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 63 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.Press to select “OSD Language”.Press and hold until the Options menu is displayed.Press to select your preferred menu.Press to adjust the menu.Press to exit from Options menu.Downloaded From TV-Manual.com Manuals