Panasonic TH-42PH10EK Operating Instructions Manual

Also see for TH-42PH10BK: Operating instructions Service manual

Contents

Advanced settingsNormalNormalise002.2Off1/2Black extensionAGCGammaInput levelAdvanced settings0000002/2W/B Low BW/B High RW/B Low RW/B Low GW/B High GW/B High B24Item Effect DetailsBlackextension Less More Adjusts the dark shades of the image in gradation.Input level Less MoreAdjustment of parts which are extremely bright and hard to see.(This cannot be adjusted when the input signal is Digital.)Gamma Down Up S Curve 2.0 2.2 2.5AGC Off On Increases the brightness of dark signal automatically.W/B HighR Less More Adjusts the white balance for light red areas.W/B HighG Less More Adjusts the white balance for light green areas.W/B HighB Less More Adjusts the white balance for light blue areas.W/B Low R Less More Adjusts the white balance for dark red areas.W/B Low G Less More Adjusts the white balance for dark green areas.W/B Low B Less More Adjusts the white balance for dark blue areas.On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time orthe ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.(For TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK)Picture Adjustments