Panasonic TH-42PH11MK Operating Instructions Manual

Also see for TH-42PH11MK: Service manual

1/2SignalPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBInput labelPower saveSetupScreensaverINPUT MENU ENTER/+ /VOL- /INPUT MENU ENTER/+ /VOL-/14Initial selectionsSelecting the On-Screen Menu LanguagePress to display the Setup menu.Press to select the OSD Language.Press to select your preferred language.Notes:• Selecting is also possible by pressing the INPUT button on the unit.• Input terminal will not be selected if the terminal board is not installed into theSLOT.• Select to match the signals from the source connected to the component/RGB inputterminals. (see page 33)• In 2 screen display, the same input mode cannot be selected for the main picture andsub picture.• Image retention (image lag) may occur on the plasma display panel when a still pictureis kept on the panel for an extended period. The function that darkens the screenslightly is activated to prevent image retention (see page 43), but this function is notthe perfect solution to image retention.Selecting the input signalSelect the input signals to be connected by installing the optional Terminal Boards.Press to select the input signal to be played back from theequipment which has been connected to the Plasma Display.Input signals will change as follows:INPUT1A INPUT2 PCINPUT3INPUT1BSLOT1 is for dual input so that you can select INPUT1A orINPUT1B for INPUT1.INPUT1A : VIDEO signal terminal in SLOT1INPUT1B : S-VIDEO signal terminal in SLOT1.......(Japanese).......(Russian)Русский.......(Chinese)ItalianoFrançaisDeutschEnglish(UK)EspañolENGLISH(US)Selectable languages