Panasonic TH-42PH20U Operating Instructions Manual
Also see for TH-50PH20U: Operating instructionsManual de instrucciones
                                                        |
26PICTURE AdjustmentsADVANCED SETTINGSNotes:• “COLOR” and “TINT” settings cannot beadjusted for “RGB/PC” input signal.• You can change the level of each function(PICTURE, BRIGHTNESS, COLOR, TINT,SHARPNESS) for each PICTURE MENU.• The setting details for STANDARD,DYNAMIC and CINEMA respectivelyare memorized separately for each inputterminal.• The “TINT” setting can be adjusted forNTSC signal only during Video (S Video)input signal.• In PICTURE, there is not a noticeablechange even when contrast is increasedwith a bright picture or reduced with a darkpicture.On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any timeor the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)Item Effect AdjustmentsPICTURE Less More Adjusts the proper picture contrast.BRIGHTNESS Darker BrighterAdjusts for easier viewing of darkpictures such as night scenes andblack hair.COLOR Less More Adjusts color saturation.TINT Reddish Greenish Adjusts for natural esh tones.SHARPNESS Less More Adjusts picture sharpness.Item Effect DetailsBLACKEXTENSION Less More Adjusts the dark shades of the image in gradation.INPUTLEVEL Less More Adjustment of parts which are extremely bright and hard to see.GAMMA Down Up S CURVE 2.0 2.2 2.6AGC OFF ON Increases the brightness of dark signal automatically.W/B HIGH R Less More Adjusts the white balance for light red areas.W/B HIGH G Less More Adjusts the white balance for light green areas.W/B HIGH B Less More Adjusts the white balance for light blue areas.W/B LOW R Less More Adjusts the white balance for dark red areas.W/B LOW G Less More Adjusts the white balance for dark green areas.W/B LOW B Less More Adjusts the white balance for dark blue areas.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine