Panasonic TH-42PW7LZ Operating Instructions Manual

15PLASMA DISPLAYINPUTSURROUNDVOLN RPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCMULTIPIP SWAP SELECT MOVEBasic ControlsSURROUND buttonThe surround setting switches on and off each time the SURROUND buttonis pressed.The benefits of surround sound are enormous. You can be completelyenveloped in sound; just as if you were at a concert hall or cinema.Note:The surround settings are memorized separately for each AUDIO MENU(STANDARD, AUTO).Standby (ON / OFF) buttonThe Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12).Press this button to turn the Plasma Display On, from Stanby mode. Press it again to turn the Plasma DisplayOff to Stanby mode.ON OFFINPUT button(INPUT1, INPUT2, INPUT3 and PC IN selection)Press to select INPUT1, INPUT2, INPUT3 and PC IN input SLOTSsequentially. (see page 13)Sound mute On / Off (see page 23)Volume AdjustmentPress the Volume Up “+” or Down “–” button to increase or decreasethe sound volume level.ACTION buttonPress to make selections.ASPECT buttonPress to adjust the aspect. (see page 18)SOUND button (see page 23)SET UP button (see page 16)POSITION buttonsR button (see page 16, 17)Press the R button to return to previous menu screen.PICTURE POS. / SIZE button (see page 19)OFF TIMER buttonThe Plasma Display can be preset to switch to stand-by after a fixedperiod. The setting changes to 30 minutes, 60 minutes, 90 minutes and0 minutes (off timer cancelled) each time the button is pressed.When three minutes remain, “Off timer 3” will flash.The off timer is cancelled if a power interruption occurs.30 60090ONSURROUND