Panasonic TH-42PW7LZ Operating Instructions Manual

28SET UP for Input SignalsCOLOR SYSTEM / Panasonic AUTOSelect SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) inputsignal mode.(“SIGNAL [VIDEO]” menu is displayed.)Press to select the “COLOR SYSTEM” or“Panasonic AUTO”.Press to select each function.If the image becomes unstable:With the system set on Auto, under conditions oflow level or noisy input signals the image may inrare cases become unstable. Should this occur,set the system to match the format of the inputsignal.ModeCOLOR SYSTEMPanasonicAUTO (4:3)FunctionSet the color system to match the input signal. If set to “AUTO”, the color system isdetermined automatically.Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTOis selected. If you would like to view 4:3 images in Just format, set to “JUST”.AUTO PAL SECAM M.NTSC NTSC3:2 PULLDOWN / VIDEO NRPress to select 3:2 PULLDOWNor VIDEO NR.Press to set ON/OFF.Press to exit from adjust mode.3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as moviepictures, which are recorded at 24 frames per second.If the picture is not stable, turn the setting to OFF.Note:When ON, this setting only affects the following signal input:• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.OSD LANGUAGE ENGLISH (US)PCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFCOMPONENT / RGB-IN SELECTRGBINPUT LABELSCREENSAVERSIGNALPOWER SAVESET UP3D Y/C FILTER (NTSC)COLOR SYSTEMSIGNALONAUTO3 : 2 PULLDOWNPanasonic AUTO (4 : 3)OFFNORMAL[VIDEO]VIDEO NR OFFROSD LANGUAGE ENGLISH (US)PCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFCOMPONENT / RGB-IN SELECTRGBINPUT LABELSCREENSAVERSIGNALPOWER SAVESET UP3D Y/C FILTER (NTSC)COLOR SYSTEMSIGNALONAUTO3 : 2 PULLDOWNPanasonic AUTO (4 : 3)OFFNORMAL[VIDEO]VIDEO NR OFFPress ACTION ( ) buttonPress ACTION ( ) button12VIDEO NR: Automatically reduces unwanted picture noise.Note:VIDEO NR cannot be adjusted while a PC signal is being applied.SYNCVIDEO NRSIGNALAUTOH-FREQ.V-FREQ.kHzHz33.860.0[RGB]3 : 2 PULLDOWN OFFOFF3 : 2 PULLDOWNVIDEO NRSIGNALOFFOFF[COMPONENT]3 : 2 PULLDOWNVIDEO NRSIGNALOFFOFFH-FREQ.V-FREQ.kHzHz33.860.0[DVI]