Panasonic TH-42XVS30 Operating Instructions Manual

11Connection1 2DEDICATED RECEIVER IN SERVICE USE12 12SPEAKERSTerminals (R)S P E A K E R STerminals (L)– Cable fixing bandsSecure any excess cables with bands as required.Note:Please turn off the power of the Plasma Display unit and Digital Media Receiver when connecting or removing Display - Receiver cable.Display connectionWhen connecting the speakers, be sure to use only the optional accessory speakers.For details on installation and connection of the speaker, refer to the Speaker’s Installation Manual. (Supplied)SpeakersPass the attached cablefixing band through theclip as shown in thefigure.To secure cables connected to Terminals, wrap the cable fixing bandaround them then pass the pointed end through the locking block, asshown in the figure.While ensuring there is sufficient slack in cables to minimize stress(especially in the power cord), firmly bind all cables with the suppliedfixing band.AC cord connection(see page 19)To tighten: To loosen:Pull PullPush the catch3. Slide up the clamper and fixthe AC cord plug securely.2. Insert the AC cord andclose the clampersecurely.1. Open the clamper.Clamper AC cordNote: The power plug in the illustration may not be the type fitted to your set.To loosen theclamper:– AC cord fixingTo DEDICATED DISPLAY OUTconnector on Digital Media Receiver These terminals are not in use.