Panasonic TH-42XVS30 Operating Instructions Manual

59Operating peripheral equipmentProgramming the remote control codeYou can operate other manufacturers’ components using this TV’s remote control.Preparation:• Connect the plug of the external component to the wall outlet.• Make sure the component is turned off.1TV VCR DVDDBS RCVR CBL AUX2POWER+CHVOLCHVOLOK1 2 34 5 67 8093Press and hold POWER and OK together, for at least5 seconds.• The mode selection buttons flashes, and then releasethe POWER and OK.Select the type of the component.• The selected button light and all others go out.Enter the 3-digit infrared code (see pages 60-62).• Factory default setting : Panasonic• Press POWER to test the operation.Notes:• If the component does not operate with the Remote Control, repeat the procedureusing another code. (Some brands have multiple codes).• If an incorrect code is entered, or if the procedure takes longer than 30 seconds,theprogramming will fail.MENUPLAYPROGEXITLIGHTA -ANTENNA - BSAPASPECTMUTERECALLBBESTOPPAUSE RECCHVOLCHVOLOKTV/VIDEO1 2 34 5 67 809PIP MINREWPIP MAXFFFREEZETV/VCRPIP SPLIT MOVE SWAPSEARCHOPEN/CLOSESPLIT CHDVD/VCR CHCBLTV VCR DVDDBS RCVR AUXR-TUNEPOWERAfter selecting the type of component (step 2, above)12 Press to store the code.CHVOLCHVOLOKPress to select the code.• The code starts from the current device.• Press POWER button to test the operation.• Repeat the steps until the component code is found.It may take many attempts before the correct code isfound.CHVOLCHVOLOKTo find a code not listed in the index