Panasonic TH 50PH11UK Operating Instructions Manual

Contents

1/2SIGNALPCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFAUTO POWER OFF OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBINPUT LABELPOWER SAVESET UPSCREENSAVERINPUT MENU ENTER/+ /VOL- /INPUT MENU ENTER/+ /VOL-/15Initial selectionsSelecting the On-Screen Menu LanguageSelecting the input signalPress to display the SET UP menu.Press to select OSD LANGUAGE.Press to select your preferred language.Selectable languagesSelect the input signals to be connected by installing the optional Terminal Boards.Press to select the input signal to be played back from theequipment which has been connected to the Plasma Display.Input signals will change as follows:Notes:• Selecting is also possible by pressing the INPUT button on the unit.• Input terminal will not be selected if the terminal board is not installed into the SLOT.• Select to match the signals from the source connected to the component/RGB inputterminals. (see page 34)• In 2 screen display, the same input mode cannot be selected for the main picture andsub picture.• Image retention (image lag) may occur on the plasma display panel when a still pictureis kept on the panel for an extended period. The function that darkens the screen slightlyis activated to prevent image retention (see page 44), but this function is not the perfectsolution to image retention........(Japanese).......(Chinese)ItalianoFrançaisDeutschEnglish(UK)EspañolENGLISH(US).......(Russian)РусскийINPUT1 INPUT2A PCINPUT3INPUT2BSLOT2 is for dual input so that you can select INPUT2A orINPUT2B for INPUT2.INPUT2A : HDMI signal terminal in SLOT2INPUT2B : HDMI signal terminal in SLOT2