Panasonic TH 50PH11UK Operating Instructions Manual

Contents

0001/2SOUNDNORMALNORMALIZESTANDARDOFFTREBLEAUDIO MENUBALANCEBASS0MIDSURROUNDMAINAUDIO OUT (PIP)26SOUND AdjustmentNote: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.1 Press to display the SOUND menu.Press to select the menu to adjust.Select the desired level by listening to the sound.Press to exit from adjust mode.2 Select to adjust each item.While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)3Item DetailsAUDIO MENUSTANDARD: Emits the original sound.DYNAMIC: Accentuates sharp sound.CLEAR: Attenuates human voice.BASS Adjusts low pitch sounds.MID Adjusts normal sounds.TREBLE Adjusts pitch sound.BALANCE Adjusts left and right volumes.SURROUND Select ON or OFF.AUDIO OUT (PIP)MAIN: Selects main picture sound.SUB: Selects PIP frame sound.A BINPUT1PCA BINPUT1PCMusical note ♪ is displayed on right side of the audio outputscreen label.Item DetailsLeft Channel Channel 1 to Channel 16Selects left audio channel.Right Channel Channel 1 to Channel 16Selects right audio channel.Sound OutON OFFON: Enables audio output.OFF: Disables audio output.Level MeterOFF 1-8ch 9-16chSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4 channelseach on both right and left sides of the display.OFF: Hides the audio level meter.1-8ch: Displays the audio level meter (1-8ch)9-16ch : Displays the audio level meter (9-16ch)SDI Sound OutputThis menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.2/2Sound OutLeft ChannelRight ChannelChannel 1Channel 1OFFLevel Meter OFFSDI Sound OutputNotes:• This menu is available only when selecting aslot that HD-SDI Terminal Board with audio(TY-FB10HD) is installed.• This menu is unavailable when 2-picturedisplay mode is active.