Panasonic TH-50PV30 Operating Instructions Manual

Also see for TH-37PA30: Operating instructions Operating instructions Operating instructions

15During TV modePress the MENU button.Move to choose SETUP.Access SETUP.Move to choose TUNING MENU.Access TUNING MENU.Move to choose menu option.Adjust chosen option or access chosen menu.Press the EXIT button at any time to go back to watchingTV.Pressing the OK button after having adjusted somefeatures will store the setting as the default (replacingthe factory setting).TuningMENUTV1 2 34 5 67 8 9C 0NOKOKMAIN MENUP I C T U R ES E T U PSOUNDLANGUAGEOFF TIMERCH COLOUR SETCHILD LOCKTEXT SELECTSIDE PANELPOWER SAVESETUPOFFHIGHENGLISHOFFOFFTELETEXT FASTEXTFINE TUNESYS SELECTAUTO TUNEMANUAL TUNESOUND SYSCOLOUR SYSCH SELECTTUNING MENUASIA/M.EAST5.5MHzAUTOSKIP OFFPOSITIONOWNER IDSETUPTUNIG MENU ACCESSSelect the most easily viewed channel selection method. See page 16.POSITION / DIRECTSelect the system.CHINA HK/UK ASIA/M.EAST NZ/INDONES AUSTRALIAJAPAN CATV AMERICA SPECL VER E.EUROPECHINAHK/UKASIA/M.EASTNZ/INDONESAUSTRALIAE.EUROPESPECL VERAMERICACATVJAPANChinaHong Kong, United KingdomMalaysia, Singapore, Thailand, Asia countries, Kuwait, Saudi Arabia, United Arab Emirates, Middle East countries, etc.New Zealand, Indonesia, etc.AustraliaCIS, Poland, etc.South AfricaUSA, Chile, Mexico, Panama, Pelu, Philippines, Taiwan, Venezuela, etc.USA CATVJapanSYSTEM SELECT REGIONAllows you to automatically retune the TV. Useful if you move house and wish to retune your TVto the local stations. See page 17.Allows individual program positions to be tuned, manually. See page 18.Allows you to change the sound system used for a programme channel.Choose the required sound system:4.5MHz / 5.5MHz / 6.0MHz / 6.5MHzLets you select the correct transmission standard for the transmission signal being received.See page 22.AUTO / PAL / SECAM / NTSC 4.43 / NTSC 3.58Use to make small adjustments to the tuning of an individual station (useful for example whenweather conditions are affecting reception quality of a program).To cancel the FINE TUNE, tune again by MANUAL TUNE.It is possible to skip Program Number on which no TV stations are tuned appearing on thescreen. The function is only effective when pressing the Program Number up or down buttoneither on the TV set or on the remote control. Under the normal viewing, select the ProgramNumber you would like to skip. Then, access TUNING MENU and set SKIP to ON.CH SELECT(Channel Selection)SYS SELECT(System Selection)AUTO TUNEMANUAL TUNESOUND SYS(Sound System)COLOUR SYS(Colour System)FINE TUNESKIPTUNING MENUEXITExampleOfrecido por www.electromanuales.com