Panasonic TH-50PV30 Operating Instructions Manual

Also see for TH-37PA30: Operating instructions Operating instructions Operating instructions

4Safety PrecautionsWARNINGSetupThis Plasma TV is for use only with the following optional accessories. Use with any other type of optionalaccessories may cause instability which could result in the possibility of injury.(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)• Pedestal ······································· TY-ST42PX20 (TH-37PA30, TH-42PA30)TY-ST50PX20 (TH-50PV30)• Display stand ································ TY-DP4201WTY-S37PX20W (TH-37PA30)TY-S42PX20W (TH-42PA30)TY-S50PX20W (TH-50PV30)• Wall-hanging bracket (vertical) ···· TY-WK42PV3W• Wall-hanging bracket (angle) ······· TY-WK42PR2WAlways be sure to ask a qualified technician to carry out set-up.Do not place the Plasma TV on sloped or unstable surfaces.• The Plasma TV may fall off or tip over.Do not place any objects on top of the Plasma TV.• If water is spilt onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result infire or electric shock. If any foreign objects get inside the Plasma TV, please consult your local Panasonic dealer.For sufficient ventilation;If using the pedestal (optional accessory) for the Plasma TV, leave a space of at least 10 cm at the top, leftand right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method,leave a space of at least 10 cm at the top, bottom, left and right, and at least 1.9 cm at the rear.Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.• It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.When using the Plasma TVThe Plasma TV is designed to operate on 220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.Do not stick any foreign objects into the Plasma TV.• Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma TV, as doingso can cause fire or electric shock.Do not remove the cover or modify it in any way.• High voltages which can cause severe electric shocks are present inside the Plasma TV. For any inspection,adjustment and repair work, please contact your local Panasonic dealer.Securely insert the power supply plug as far as it will go.• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wallsocket is loose, they shall not be used.Do not handle the power supply plug with wet hands.• Doing so may cause electric shocks.Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plugbody, not the cable.• Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near anyhot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable isdamaged, have it repaired at your local Panasonic dealer.If the Plasma TV is not going to be used for any prolonged length of time, unplug the power supply plug fromthe wall outlet.Ofrecido por www.electromanuales.com