Panasonic TH-50PV600AZ Service Manual

Also see for TH-50PV600AZ: Operating instructions Service manual

Contents

hotel mode

I TH-50PV600AZ / TH-50PV600H / TH-50PV600M / TH-50PV600MT8 Self-check Function1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.2. To get into the Self -Check mode press the Down ( —/ V ) button on the customer controls at the front of the set, at the sametime pressing the Recall button on the remote control, and the screen will show :Check result of 1C"OK" — ► Normal"NG" — ► Abnormal(Check 1C or its nearby components)MEM O.K. Sum : 0548GC5 O.K.AVSW1 O.K. OPTION1 OFAVSW2 O.K. OPTION2 E2Tun1 O.K. OPTION3 1EVIF O.K. OPTION4 48MSP O.K. OPTION5 3BPANEL O.K. OPTION6 AOHDMI O.K. OPTION7 A1ADV O.K. OPTION8 40I ________ OPTION9 FFOPTIONIO 6FOPTION11 4EOPTION12 09OPTION13 00CHECK D8___ ________ ________ _i| PANEL-MCU 01.00IPANEL-EEPROM 30.08IPANEL-FPGA 40.22: p a n e l -p d r o m 30.08' Factory use only-Option Code displayThe numbers are displayed in hexadecimal.Note: Option Codes are only examples.Please refer the option table for each models.■Software VersionIf the CCU ports have been checked and found to be incorrect or not located then “--” will appear in place of “O.K.”.Display Ref.No. Description BoardMEM IC1102 EEPROM DG-BoardGC5 IC4037 GC5 Processor DG-BoardAVSW1 IC3005 Video SW H-BoardAVSW2 IC2105 Audio SW H-BoardTun1 TU001 Tuner (Main) TA-BoardVIF - - -MSP IC2106 Multi Sound Processor H-BoardPANEL IC9003 Convert Micon D-BoardHDMI IC4026 HDMI I/F Receiver DG-BoardADV IC4019 10bit A/D DG-Board26