© 2007 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying anddistribution is a violation of law.TH-58PH10BKTH-58PH10EKGPH10D ChassisHigh Definition Plasma DisplaySpecificationsPower Source 220-240 V AC, 50/60 HzPower ConsumptionPower on 630 WStand-by condition Save OFF 0.8 W, Save ON 0.6 WPower off condition 0.3 WPlasma Display panel Drive method: AC type 58-inch,16:9 aspect ratioScreen size 1,287 mm (W) × 723 mm (H) × 1,476 mm (diagonal)(No. of pixels) 1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots]Operating conditionTemperature 0 °C - 40 °CHumidity 20 % - 80 %Applicable signalsColor System NTSC, PAL, PAL60, SECAM, Modified NTSCScanning format 525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) / 60i 50i 24p 25p30p 24sF .... SMPTE274M, 1250 (1080) / 50iPC signals VGA, SVGA, XGA,SXGA, UXGA ..... (compressed)Horizontal scanning frequency 15 - 110 kHzVertical scanning frequency 48 - 120 HzConnection terminalsAV IN VIDEO IN (BNC) 1.0 Vp-p (75-ohm)S VIDEO IN (MINI DIN 4PIN) Y: 1.0 Vp-p (75-ohm), C: 0.286 Vp-p (75-ohm)AUDIO IN (RCA PIN JACK × 4) 0.5 Vrms (high impedance)PC IN (HIGH-DENSITY MINI-D-SUB 15PIN) Y or G with sync 1.0 Vp-p (75-ohm)Y or G without sync 0.7 Vp-p (75-ohm)B / P B / CB :0.7 Vp-p (75-ohm)R / P R / C R :0.7 Vp-p (75-ohm)HD / VD:1.0 - 5.0 Vp-p (high impedance)VBS (use HD port) with picture 1.0 Vp-p (high impedance)ORDER NO. PCZ0706065CE