Panasonic TH-58PH10EK Service Manual

Also see for TH-58PH10BK: Operating instructions Service manual

Contents

Option Menu for GPH10D seriesGPH10D chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful forspecial function required customers. This should be set at the installation stage.Option menus default setting ContentsWeekly Command Timer --- Sets Weekly Command Timer.Onscreen display On Enable/Disable to display input mode indication after power on and no signalindication.Initial INPUT Off Sets the initial input mode when the power is turned on. Allow input modeselection while power is on.Initial VOL level Off Sets the initial volume level when the power is turned on. Allow Volumecontrol while power is on.Maximum VOL Level Off Sets the maximum volume to desired level. Volume cannot exceed this level.INPUT lock Off Fixes the input mode to AV, Component/RGB or PC. Can not change inputmode by input selection key.Button lock Off Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volumeup/down)Remocon User Level Off Remote key invalidation.Off: Valid key is all key of remote.User1: Valid key are only Stand-by (ON/OFF), Input, Direct input, Status,Surround, Sound mute On/Off, and volume adjustment.User2: Valid key is only Stand-by (ON/OFF).User3: All keys are null and voidAdvanced PIP Off Off: Sets normal two screen display mode.On: Sets Advanced PIP mode.Off-timer function Enable Off-timer operation Enable/Disable.Initial Power Mode Normal Sets the power mode of the unit for when the power recovers from failure orafter plugging off and in again.ID select 0 Set ID number from 0 to 100.Remote ID Off Remote ID function On/Off.(While the Remote ID on, standard remote function can not control the unit.)Serial ID Off Serial ID function On/OffDisplay size Off Adjusts the image display size on screen.On: Sets the image display size approximately 95% of the normal imagedisplay.Studio W/B Off Set warm mode color temperature to 3,200 Kelvin.Studio Gain Off Sharpens the contrast for a better view when a part of the image is too lightto see.Slot power Off Sets the slot power mode while the power is turned on.Allow Optional Terminal Board insert Slots while power is on.V. Installation Off V. Installation function On/Off (Not used)Rotate Off The image rotates 180 degrees (up-down)Serial Slot Select Slot1 Selects the slot which communicates serial.Note: The setting of an external command can be set only from the fixedserial terminal.Note:When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”adjustments, set all the values “Off” so that all the buttons are enabled again.Press the “Volume down” button on main unit together with “R“ button on the remote control and hold for more than 5 seconds.The “SHIPPING” menu is displayed and the lock is released when it disappears.38TH-58PH10BK / TH-58PH10EK