115.3. Hotel mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu, pleaseenter the following command (within 2 second).[TV] : Vol. [Down] + [REMOTE] : TV/VIDEO (3 times)Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuDisconnect AC power cord from wall outlet.4. Explain the Hotel mode setup menuitem FunctionMode Select hotel mode ON/OFFInput Select input signal modes.Set the input, when each time power isswitched on.Selection:-/RF/COMP1/COMP2/HDMI1/HDMI2/HDMI3VIDEO1/VIDEO2/PC• Off: give priority to a last memory.Channel Select channel when input signal is RF.Set the channel, each time power is switchedon.Selection:Any channel number or [-].[-] means the channel when turns off.Volume Adjust the volume when each time power isswitched on.Range:0 to 100Vol. Max Adjust maximum volume.Range:0 to 100OSD Ctrl Restrict the OSD.Selection:OFF/PATTERN1• OFF: No restriction• PATTERN1: restrictionFP Ctrl Select front key conditions.Selection:Off/Pattern1/All• Off: altogether valid.• Pattern: only input key is valid.• All: altogether invalid.Pow Ctrl Select POWER-ON/OFF condition when ACpower cord is disconnected and then con-nected.OFF: The same condition when AC powercord is disconnected.ON: Forced power ON condition.