Panasonic TH-C42FD18 Service Manual

Also see for TH-C42FD18: Operating instructions

237.20. Remove the S-Board1. Remove the Cabinet assy. (See section 7.19.)2. Disconnect the connector (S2).3. Remove the screws (×2 ) and remove the S-Boardmetal frame.4. Remove the screws (×2 ) and remove the S-Board.7.21. Remove the K-Board1. Remove the Cabinet assy. (See section 7.19.)2. Remove the S-Board. (See section 7.20.)3. Remove the screws (×2 ).4. Disconnect the connector (K1) and Remove the K-Board.7.22. Remove the plasma panel (fin-ished)1. Place the new plasma panel (finished) on the flat surfaceof the table (covered by a soft cloth), with the plasmapanel surface facing downward.2. Attach the C1-Board and the C2-Board, connect the flexi-ble cables (×15) from the plasma panel to the C1-Boardand the C2-Board, and fit the flexible cable holders.3. Attach the Hooks (left, right) and fit the stand brackets (L,R) to the new plasma panel.4. Place the plasma panel section on the servicing stand.5. Attach the cabinet assy and each P.C.Board and so on, tothe new plasma panel.*When fitting the cabinet assy, be careful not to allowany debris, dust or handling residue to remainbetween the front glass and plasma panel.