Panasonic TOUGHBOOK CF-37 Series Reference Manual

Also see for CF-37 Series: Operating instructions Supplementary instructions Supplementary instructions Reference manual Reference manual

36Do not leave a disk in the drive while transporting your computer.Remove the disk by pressing the eject button before your computer is OFF orenters the suspend/hibernation mode, so the head locking mechanism mayengage when the computer is powered off.Do not remove a disk while accessing data. This may damage data on the disk.(While accessing the disk, the access lamp ( ) lights. Be sure that the accesslamp is turned off when removing a disk.)Never insert foreign objects into the slot of the SuperDisk Drive Pack. It may cause amalfunction.Only use labels that come with disks.If dust has accumulated on the head surface, problems may occur when reading orwriting data. In this case, cleaning the head is recommended using a cleaner kit.(LS120HCL produced by Imation)During the initial 10 seconds after inserting a SuperDisk or during data access, ashrill noise may be produced. This is not a malfunction.Do not place the AC adapter to the front of the SuperDisk Drive Pack. Magnetic noisemay cause an error.Do not disassemble the SuperDisk Drive Pack.SuperDiskTM DriveIn this manual, the followings are described as disks.SuperDisk (120 MB)Floppy disk (720 KB, 1.44 MB)Please refer to the manual that accompanies the SuperDisk Drive Pack exceptthe following.NOTEUsage PrecautionsInstalling/Removing a SuperDisk Drive Packpage 32