Panasonic TOUGHBOOK CF-37 Series Reference Manual

Also see for CF-37 Series: Operating instructions Supplementary instructions Supplementary instructions Reference manual Reference manual

42Set the power management function to disable1USB DevicesInstall the Windows 95 USB device driversCAUTIONAfter a driver has been installed, do not use the suspend or hibernation func-tion. If the suspend or hibernation mode is activated, the computer may notfunction properly. Power off, then on, using the power switch to resume properoperation.If you want to use the suspend or hibernation function when the USB driver isinstalled, disable the USB device function of the computer. ( page 17)(To next page)USB PortInstalling USB Devices1 In [Start] - [Run], input [c:\util\msupdate\usb\usbsupp.exe], then press [OK].At the confirmation message, press [Yes].2 Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].• Installation will start if [Yes] is pressed.• Installation will be aborted if [No] is pressed.3 At the display indicating the completion of installation, press [OK]. The com-puter will automatically restart.4 In [Start] - [Run], input [c:\util\msupdate\usb\usbcopy.bat], then press [OK].5 Click at the upper right corner to close the display.6 In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select[PCI Universal Serial Bus] in [Other devices], press [Remove], then press[OK].7 Press [Refresh] and press [Close] at the [System Properties],8 Restart the computer.21 Run the Setup Utility. ( page 48)2 Using and , select [Power].3 Using and , select [Power Management Mode] and press Enter .4 Using and , select [Disable] and press Enter .5 Using and , select [Power Switch] and press Enter .6 Using and , select [Off] and press Enter .7 Using and , select [Panel Switch] and press Enter .8 Using and , select [LCD Off] and press Enter .9 Using and , select [Fn+F7/Fn+F10] and press Enter .10 Using and , select [Disable] and press Enter .11 Press F10 , then select [Yes].