Panasonic TQBC0627-2 Operating Instructions Manual

45How to connect the Input/Output terminalsConnects VCRs and other peripheral equipmentInput/Output fromAV4 Scart SocketQ-Link dataInput/Output fromAV2 Scart SocketQ-Link dataInput/Output fromAV1 Scart SocketVCRDVD PLAYERDVD RECORDERSATELLITE RECEIVERScart cableVCR/S-VHS VCRQ-LINK COMPATIBLE VCRDVD PLAYERDVD RECORDERSATELLITE RECEIVERVCR/S-VHS VCRQ-LINK COMPATIBLE VCRDVD PLAYERDVD RECORDERScart cableScart cableRRGBVIDEOS VIDEO VIDEO S VIDEOLPRPBYAUDIO OUTAV 4CAV4 AV2 AV1COMPONENTVIDEOVIDEO RGBInput AV4Componentsignal pin typeDVD PLAYERSATELLITE RECEIVERPR PB YPRPBYAV 4CCOMPONENTVIDEONotes:• Additional equipment and cables shown are not supplied with this set.• Do not connect a computer with TTL output (5V) to this set.• The AV2, AV4 21 pin socket can also be used as an output to Audio/Video equipment. (see page 9)• Select the desired VIDEO input position by pushing the TV/AV button. (see page 15)• For Scart socket wiring information see page 49.• Scart RGB and Component video cannot be connected at the same time to AV4, Scart RGB has priority. AV4C(Component input) cannot be selected while Scart RGB is connected.ConnectionsNote:Occasionally, it may take a while for picture to becomestable when changing the input signal from Componentinput signal (625i) of AV4C to TV signal, this is not amalfunction.The time it takes to stabilize will depend on the externalequipment connected.