Panasonic TU-DST50 Operating Instructions Manual

Also see for TU-DST50 Operating: Operating instructions

Panasonic TU-DST50 Operating Instructions Manual Manual pdf 48 page image

SPECIAL FEATURF-qSpecial FeaturesSET UPAntenna/Cable ModeSelect either Antenna or Cable mode, depending on the type of incoming signal youare using. Cable must be 8VSB format.Procedure[] In SET UP Menu, select INPUT to choose either ANTENNA or Cable,[] Press the Ib arrow, then the • and • arrows to select ANTENNA, Cable STD, Cable HRCor Cable IRC.ANTENNA - VHF/UHFCable STD - Standard Cable TV SignalsCable HRC - Harmonic Related (_arrierCable IRC - Incremental Related CarrierNote: Contact your local cable provider if you are not sure which setting to use.[_ Press the ACTION button to make your selection.[] Press the • arrow to exit back to Roller Guide.Note: Whenever the antenna or cable mode is changed, Timer I and Timer 2 will revert backto default settings.SET UPSELECT ANTENNAProgramming Available ChannelsYou must perform the automatic channel programming before manually adding anddeleting channels because of the digital tuning system used by the STB. This methodwill ensure that every available channel will be captured and stored into memory.Automatic Channel ProgrammingThe STB will scan for all available channels and store them in memory. The scan willnormally take several minutes to complete.Procedure[] In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store allchannels with a signal.Press the ACTION button to cancel or exit back to SET UP Menu.Note: As more digital channels become available in your area, the AUTOfeature must be selected to store the new digital channels into memory.[]