4.1 Installing Your Digital Receiver – Quick Set Up Guidethe digital receiver is installed, or afterrestored (section 6.4), you will beasked to select the video connection format. Select theionSThe first time the digital receiver is installed, or after Defaultstored (section 6.4), you will be asked to selectthe region you live in so that the digital receiver will display thefirst time the digital receiver is installed, or after Default(section 6.4), you will be asked to selectyour preferred aspect setting. This is a choice of the WidePThe audio can be received in two format types, Dolbybroadcasters sometimes use bothtypes, please select which format that you prefer to listenCondition is restored ( Section 6.4), the digital receiver willlly scan for available digital services. This may takeInstallationSCART ModeThe first timeComponentCompositeRGBPlease select SCART modeDefault Condition isvideo format that is the same as the AV lead connectyou have made to the TV display (refer Quick ConnectGuide section 4).elect RegionWestern AustraliaTasmaniaNorthern TerritoryAustralian Capital TerritoryPlease select your state / regionSouth AustraliaNew South WalesVictoriaQueenslandCondition is recorrect local time. The regions are New South Wales, Victoria,Queensland, South Australia, Western Australia, Tasmania,Northern Territory and Australian Capital Territory and areselected by the up/down cursor keys.Select Aspect RatioTheWide (16:9)Centre CutLetterboxPlease select your preferreddisplay aspect ratioCondition is restored(16:9), Normal / Centre Cut (4:3) or Normal / Letter Box (4:3).Select the aspect that is correct for your TV display. This can bechanged at a later date.referred Audio TypeMPEG1Dolby DigitalPlease select the audio typeyou preferDigital and MPEG. Theto. This format will be select when the broadcastertransmits both types. This can be changed at a later date.AutotuneThe first time the digital receiver is installed, or after DefaultAutomaticaUp to 5 minutes. After tuning finishes press OK.8