Panasonic TX-32DW304 Operating Instructions Manual

English - 7 -Features• Fully integrated digital terrestrial/cable/satellite TV(DVB-T2/C/S2)• HDMI inputs to connect other devices with HDMIsockets• USB input• OSD menu system• Scart socket for external devices (such as DVDPlayers, PVR, video games, etc.)• Stereo sound system• Teletext• Headphone connection• Automatic programming system• Manual tuning• Automatic power down after up to eight hours.• Sleep timer• Child lock• Automatic sound mute when no transmission.• NTSC playback• AVL (Automatic Volume Limiting)• PLL (Frequency Search)• PC input• Game Mode (Optional)• Picture off functionAccessories Included• Remote Control• Batteries: 2 x AA• Instruction Book• Detachable stand• Stand mounting screws (M4 x 12)Standby NotificationsIf the TV does not receive any input signal (e.g. froman aerial or HDMI source) for 5 minutes, it will gointo standby. When you next switch-on, the followingmessage will be displayed: “TV switched to stand-bymode automatically because there was no signalfor a long time.” Press OK to continue.If the TV is on and it isn’t being operated for a whileit will go into standby. When you next switch-on, thefollowing message will be displayed. “TV switched tostand-by mode automatically because no operationwas made for a long time.” Press OK to continue.TV Control Switch & Operation1. Up direction2. Down direction3. Volume / Info / Sources List selection andStandby-On switchThe Control button allows you to control the Volume/ Programme / Source and Standby-On functions ofthe TV.To change volume: Increase the volume by pushingthe button up. Decrease the volume by pushing thebutton down.To change channel: Press the middle of the button,the information banner will appear on the screen.Scroll through the stored channels by pushing thebutton up or down.To change source: Press the middle of the buttontwice(for the second time in total), the source list willappear on the screen. Scroll through the availablesources by pushing the button up or down.To turn the TV off: Press the middle of the buttondown and hold it down for a few seconds, the TV willturn into standby mode.Notes:• If you turn the TV off, this circle starts againbeginning with the volume setting.• Main menu OSD cannot be displayed via controlbutton.Operation with the Remote ControlPress the Menu button on your remote control todisplay main menu screen. Use the directional buttonsto select a menu tab and press OK to enter. Use thedirectional buttons again to select or set an item. PressReturn/Back or Menu button to quit a menu screen.Input SelectionOnce you have connected external systems to yourTV, you can switch to different input sources. Press theSource button on your remote control consecutivelyto select the different sources.Changing Channels and VolumeYou can change the channel and adjust the volumeby using the Volume +/- and Programme +/- buttonson the remote.