Panasonic TX-51P950M Service Manual

Procedure:1. Cover the Red, Blue CRT lens, projecting Green only.2. Adjust green centering magnet (DY) if the projectedgreen horizontal/vertical line does not line up with thescreen horizontal/vertical center line.3. Cover the Green, Red CRT lens, projecting Blue only.4. Repeat step 2. for blue.5. Cover the Green, Blue CRT lens, projecting Red only.6. Repeat step 2. for red.7. Cover the Red, Blue CRT lens, projecting Green only.8. Adjust green centering magnets until the center of themonoscope pattern line up with the screen center line.9. Cover the Green, Red CRT lens, projecting Blue only.10. Adjust blue centering magnets to position the center ofthe blue raster W2 away from the center of the greenraster.11. Cover the Green, Blue CRT lens, projecting Red only.12. Adjust red centering magnets to position the center ofthe red raster W1 away from the center of the greenraster.7.4. Centering Magnet Adjustment1. Receive a monoscope pattern.2. Set that Fine convergence data (Service mode1) is clear (no correction).3. Set that V-Pos data (Service mode1) is [130].4. Set that H-Pos data (Service mode1) is [954].5. Set that H-Parallel data (Service mode1) is [16].21TX-51P950M / TX-51P950X / TX-43P950M / TX-43P950X