Panasonic TX-51P950M Service Manual

10.4.1. Green Convergence Adjustment1. Select the "G-LINE CURSOR" mode by pushing "TV/AV"button on the remote control2. Use the Position Buttons to move the cursor to the pointwhere you wish to change the data (adjustment lines). Thenuse the "OK" to change from "G-LINE CURSOR" to "G-LINE DATA".3. Use the Position Buttons to adjust each point (line) so thatthe Green Crosshatch Pattern is aligned with the verticaland horizontal lines of the Convergence Adjustment Sheet.4. Push the "OK" and switch from "G-LINE DATA" to "G-LINECURSOR".5. Repeat step 1~3 to adjust the vertical lines (13) and thehorizontal lines (9).6. Select the "G-EASY CURSOR" mode by pushing "TV/AV"button on the remote control.7. Use the Position Buttons to move the cursor to the pointwhere you wish to change the data (adjustment point). Thenuse the "OK" to change from "G-EASY CURSOR" to "G-EASY DATA".8. Use the Position Buttons to adjust each point so that theGreen Crosshatch Pattern is aligned with the vertical andhorizontal lines of the Convergence Adjustment Sheet.9. Push the "MULTI PIP" and with from "G-EASY DATA" to"G-EASY CURSOR".10. Repeat step 7~9 to adjust the 9 adjustment points.11. Select the "G-POINT CURSOR" mode by pushing "TV/AV"button on the remote control.12. Use the Position Buttons to move the cursor to the pointwhere you wish to change the data (adjustment lines). Thenuse the "OK" to change from "G-LINE CURSOR" to "G-LINE DATA".13. Use the Position Buttons to adjust each point so that theGreen Crosshatch Pattern is aligned with the vertical andhorizontal lines of the Convergence Adjustment Sheet.14. Push the "OK" and switch from "G-POINT DATA" to "G-POINT CURSOR".15. Repeat step 12-14 to adjust all of adjustment points.10.4. Fine Convergence Adjustment39TX-51P950M / TX-51P950X / TX-43P950M / TX-43P950X