- 28 -Watching external inputConnect the external equipment (VCRs, DVD equipment, etc.) and you canwatch through the input.1. Display the input selection menu with AV2. Select the input mode connected to the equipment with / and pressOK to watch (The selected mode is displayed on the top left of the screen)● TV receives input signals automatically connecting with SCART whenplayback starts.– Input signals are automatically identified by the SCART (pin 8) terminal.– This function is also available for HDMI connections.– When input mode is not switched automatically, perform as above orcheck the setup of the equipment.● You can also select the input pressing AV on the remote control orINPUT/OK/HOLD for MENU button on the control panel of the TV. Pressrepeatedly until the desired input is selected.● To switch between COMPONENT and VIDEO in AV2, select with / .● You can label or skip each input mode. Skipped inputs will not bedisplayed when AV is pressed. (Input Labels)Settings Setup Display Settings● The remote control is capable of operating the contents or externalequipment.Watching External equipment Operating with TV’s remote control● To return to TV modeTV= Note =● If the external equipment has an aspect adjustment function, set it to 16:9.● For details, read the manual of the equipment or ask your local dealer.
