- 81 -● For WPS(Push button)1) Select Easy setup with Push button with / and press OK toaccess2) Press the WPS button on the access point until the light flashes3) Connect the TV with the access point with OK– WPS: Wi-Fi Protected Setup™– If the connection has failed, check the settings and positions of youraccess point. And then, follow the on-screen instructions.● It is recommended to select the encrypted access point.5. Enter the encryption key of the access point with / / / and pressOK to set● You can set characters using numeric buttons.● Press BACK/RETURN to store6. Automatically setup is done and the Network Status screen is displayedInternet service Network settings Network Status7. Select Exit with / and press OK to set● To set manuallyInternet service Network settings Custom - Wireless■ Quick setup - Wired1. Display the menu with MENU2. Select Network Network Connection with / and press OK to access3. Select Quick setup with / and press OK to access4. Automatically setup is done and the Network Status screen is displayedInternet service Network settings Network Status5. Select Exit with / and press OK to set● To set manuallyInternet service Network settings Custom - Wired
