- 15 -SCART cable– AV1 (SCART) adaptor (supplied) is necessary when connecting to theTV.RF cableSCART cableTerrestrial terminalRF cableDVD Recorder / VCR● For VIERA Link connectionsFunctions VIERA Link “HDAVI Control™” Summary of VIERA Link= Note =● External equipment and cables shown are not supplied with this TV.● Please also read the manual of the equipment being connected.● Keep the TV away from electronic equipment (video equipment, etc.) orequipment with an infrared sensor, otherwise distortion of image / soundmay occur or operation of other equipment may be affected.● When using a SCART or HDMI cable, it is recommended to use fully wiredone.● Check the terminal type and cable plugs are correct when connecting.Selecting channel1. Select DVB or Analogue with TV● The selectable modes vary depending on the channels stored.● You can also select the mode pressing TV repeatedly on the remotecontrol or INPUT/OK/HOLD for MENU button on the control panel ofthe TV.2. Select a channel with Channel Up / Down or numeric buttons● DVB channel position begins from number 1 upward. Analogue channelposition numbers are in the 0 - 99 range.■ To select a channel using information bannerIt is possible to confirm the channel name and programme information byusing the information banner before changing channels.1. Display information banner with if it is not displayed
