- 49 -3D Refresh Rate(Auto / 100Hz / 120Hz)Reduces juddering and flicker noises of the 3D images when using the 3DEyewear.100Hz:If light appears to flicker under fluorescents (or dimmers) of 50 Hz.120Hz:If light appears to flicker under fluorescents (or dimmers) of 60 Hz.2D 3D Depth(Max / Mid / Min)Selects a level of 3D-image depth for viewing converted 2D images.3D Adjustment(On / Off)Adjustment of the 3D effect (except in 2D 3D mode).Set to On to enable Effect setting.● When setting to On, a safety precaution message will appear. Read itcarefully and press BACK/RETURN to go to Effect setting.● When adjusting, take into account that the vision of 3D images variesamong different individuals.Effect:Adjusts the 3D depth according to the contents or to your preference.(This setting will not be memorised when changing the input mode orchannel.)L/R Picture Swap(L/R (Normal) / R/L (Reversed))Swaps pictures for left eye and right eye (except in 2D 3D mode).Select R/L (Reversed) if you feel that the sense of depth is unusual.● This setting will not be memorised when changing the input mode orchannel.Edge Smoother(On / Off)Set to On if you feel the contoured parts of an image are not smooth enough(except in 2D 3D mode).
