- 65 -■ AnalogueSet Analogue channel manually after Auto Setup.● Set Sound System and Colour System, and then perform this function.Normally set Colour System to Auto.– SC1: PAL B, G, H / SECAM B, G– SC2: PAL I– SC3: PAL D, K / SECAM D, K– F: SECAM L, L’1. Select the channel position with numeric buttons2. Select the channel with Channel Up / Down button3. Search with /4. Select Store with / and press OK to set● Use Fine Tuning to make small adjustments to the tuning of an individualprogramme (affected by weather conditions, etc.).● If a VCR is connected only with the RF cable, select channel position 0.Update Channel ListBy updating the DVB channel list, you can add new channels, delete removedchannels or change channel names and positions automatically.● The channel list is updated while keeping your settings in Favourites Edit,Channel List, Child Lock, etc.● Depending on the signal condition, the update may not work properly.● To update DVB-S channels, set Satellite, Search Mode and Scan Modebefore updating.1) Select Satellite / Search Mode / Scan Mode with / and press OKto access2) Set each item with / and press OK to store3) After settings, select Start scan with / and press OK to search
