Panasonic Touchbook CF-71 Series Reference Manual

Also see for CF-71 Series: Operating instructions Reference manual Operating instructions Reference manual Reference manual

14CAUTIONHDD Motor Timeout: When the hard disk drive is not accessed for more than aminute, the hard disk motor is turned off.ECO Mode Timeout: If there is no input from a key, the touch pad, or the mousefor more than two minutes, the power to the LCD is cut andthe hard disk motor is turned off. Even when an applicationsoftware is being installed, the computer may enter the ECOmode.(except when the power management is set to [Disable])Power Management settings* Enabled only when the battery itself is being used.** is displayed by pressing Fn + F8 to disable the power management function.The key combination Fn + F8 sometimes does not work (such as during HDDaccess). Operability can be checked by confirming that or is being displayed ).When installed in a network environment.Be sure to disable the suspend/hibernation timeout settings with the Setup Utility.After resuming operation from the suspend or hibernation mode, the networkconnection may be severed or the computer will not work properly.When a device like a high-speed modem or ISDN terminal adapter is con-nected to the serial port, etc.There are times when high-speed communication is adversely affected if thepower management function is enabled. Please confirm that is displayed bypressing to disable the power management function. After you havefinished using a communications device, you can enable the power managementfunction by pressingKey operation and music playback.When the power management function is running, you may feel that key or touchpad (or mouse) operations are sluggish. Furthermore, music may not be playedback correctly when entering the ECO mode during playback.1 min 1 min Never2 min 2 min NeverEnable Disable DisableHDD Motor TimeoutECO Mode TimeoutPower Conservation(AC Adapter Connected)Popup window display bypressing Fn + F8Enable (Always) Enable(Battery)* DisablePower ManagementFunctionsautomatically set**(Setting at the time ofpurchase)Fn + F8 .Computing On the RoadWhen the power management setting is disabled in the Setup Utility, Fn + F8does not work.NOTEConfirm that Phoenix APM 2.0 for Windows NT ® is installed. (If [APM 2.0 for NT] isdisplayed in [Control Panel], this means that the program is installed.) If the program isnot installed, be sure to install it.Enabling Power ConservationFn + F8