Panasonic Toughbook CF-19RDRAX6M Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

120Hardware Diagnostics4 Press F10.At the confirmation message, select [Yes] and press Enter.The computer will restart.5 While [Panasonic] boot screen is displayed, press and hold Ctrl + F7 until “Please Wait”appears at the bottom of the display.When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware compo-nents.z If the password is requested, enter the password.z The touch pad and the internal keyboard may not be used when each hardware checking is run-ning. While checking, blue and yellow colors are displayed on the left side of the hardware icon (A).z By clicking the icon, you can execute the following operations:• : Start the diagnostic check from the beginning• : Stop the diagnostic check (You cannot restart the check partway through by clicking )• : Display help (click the screen or press Space to return to the original diagnostic check screen)z You can check the status of the diagnostic check by the display color on the left side of the hardware icon (A).• Aqua: Not running diagnostic check• Alternating blue and yellow: Currently running diagnostic check. The interval of the alternating colors differsdepending on the type of diagnostic check currently running.During memory diagnostic check, the display may freeze for a long period of time. Wait until the process iscomplete.• Green: No problems discovered• Red: Problems discoveredNOTEz Using the following procedure, you can run a diagnostic check on a specified hardware component, or run anextended diagnostic check on the memory or the hard disk (The extended diagnostic check is only for the memory andthe hard disk). The extended diagnostic check is more detailed, and so requires a longer period of time to run.A Click to stop the diagnostic check.A