Panasonic Toughbook CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Operating instructions Reference manual Service manual Reference manual Operating instructions

28RAM module specifications3 Installing the RAM moduleSlide in the module at an angle.Snap the module into place by pushing down on it.Removing the RAM moduleOpen the left and right hooks.Gently remove the RAM module from the slot.4 Put the cover back into placeRAM modules are extremely sensitive to static electricity. There are cases wherestatic electricity generated by the human body has adversely affected such mod-ules. In addition, it is easy to damage the RAM modules or internal components ofthe computer. Therefore, when installing or removing a RAM module, handle themodule with extreme care.Do not touch the terminals or internal components, insert objectsother than the module, or allow foreign particles to enter. Doing sohas been known to cause damage, fire or electric shock.200 pins, SO-DIMM, DDR-SDRAM, PC2100 CompliantRAM Module1 Power off your computer ( "Starting Up/Shutting Down")Do not shut down using the standby or hibernation function.Disconnect the AC adaptor and remove the battery pack.2 Remove the memory cover after removing the screwholding it in placeTurn the computer over and use a screwdriver to remove the screw.Memory CoverRAM Module SlotRAM ModuleUse a RAM module meeting the RAM module specifications below. If a module is usedthat does not meet the specifications, there are cases in which data may become unus-able or the computer may not operate properly.CAUTIONInstalling/Removing the RAM ModuleCAUTIONOnly a RAM module designed for PC2100 can be added.HooksNOTEWhether the RAM module is properly recognized or not can be con-firmed in [Main] of the Setup Utility. If the RAM module is not recognized,power off the computer and reinstall it.