Panasonic Toughbook CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Operating instructions Reference manual Service manual Reference manual Operating instructions

44Technical InformationNetworkWhen the power saving function is running, communications software may malfunc-tion. For example, communications may be halted if the standby (hibernation) modeis activated. The computer must be restarted if one of these modes is entered duringdata communications.Be sure that the power of the display is cut (for energy conservation purposes) or thecomputer enters standby (hibernation) mode after the communications software isclosed.The network connection may be severed under the condition the power of the displayis off (for energy conservation purposes) and standby (hibernation) mode.Windows 2000When network or communication software is to be used, set [System standby] and[System hibernates], [Turn off monitor] and [Turn off hard disks] (in [Start] - [Settings]- [Control Panel] - [Power Options]) to [Never].Windows XPWhen network or communication software is to be used, set [System standby] and[System hibernates], [Turn off monitor] and [Turn off hard disks] (in [start] - [ControlPanel] - [Performance and Maintenance] - [Power Options]) to [Never].Windows Security FunctionWindows has a security function that differs from the security function of the SetupUtility. For detailed information, refer to the Windows help.Set the password for secrecy and protection.Only an account for the Administrator is created the first time the computer isstarted. Create accounts for person or persons who are actually going to use acomputer.We recommend using an NTFS file system in order to use the Windows securityfunction.NOTEPrecautions When Using a CardBus Type LAN CardPrior to usage, optimize the LAN card settings by following the procedure given below.Failure to do so may result in an error message being displayed when performing acopy operation via the LAN card with a computer on the network.1 Double-click the Network Card you are using from [Network adapters] in [ControlPanel] - [System] - [Hardware] - [Device Manager]2 Select [Advanced], select [Store And Forward] from [Property], then set [Enabled] for[Value] if it is set to [Disabled](This item may be unavailable for some types of network cards.)Windows 2000